The Cannybot Racer DXF files for laser cutting is here here. Use 3mm sheet (works on acrylic and wood).
Please check your sheet is as near to 3mm as possible, sometimes we've found '3mm' acrylic that is actually 3.1 mm thick. In which case, you will have to use a small tape or shim under the motor to hold it tight.
Here is the bill of material for the build - http://forum.bluebrain.io/t/full-bill-of-materials-bom-for-cannybots/36
Here is a cool video of the bot used in scalextric style racing - https://vimeo.com/cannybots
BlueBrain is a tiny, low cost, versatile controller to control your 3D printed and laser cut robots. Please contact us if you want more information about BlueBrain.
The project files generated by LaserCut software have been added to the repository here.
The project was created with 3 groups of cuts in a specific order intended to minimise movement of parts due to holes being cut, the order of cutting is:
- Small holes
- Outer perimeters